STEWART OVERHEAD DOOR CO. LTD. is a BBB Accredited Business. Click for the BBB Business Review of this Garage Doors & Openers in Delaware ON
Welcome :Guest! | Login
10932 Longwoods Road, RR#1, Delaware, ON

519-652-8312 | 800-263-7010

info@stewartdoor.com
Stewart Overhead Door Co. Ltd.

Products


Back

Bi-Folding Doors

Bi-Folding Doors

High clearance bi-fold doors for aircraft hangars, shops, warehouses, loading areas and farm buildings. You won't go wrong with quality-built Bi-Folding Doors! They're the only bi-fold doors with high-clearance advantages, requiring less overhead space. Made of heavy-duty steel tubing in sizes up to 70-feet wide and 20-feet high, their rugged, all-welded construction prepares them for many years of day-in and day-out use with minimum maintenance.

Add To Wishlist
Generate PDF

Bi-Folding Doors Exterior Designs.

Bi-Folding Doors Exterior Colours.

Colours may not be exact. Please contact your local dealer for colour chips.

Bi-Folding Doors(Windows)

Door Specifications:

Standard door sizes
12’ to 70’ clear opening width: heights to 20’ clear.
Main door structure
Double 2" x 4" Class A500 14-gauge structural center hinge line tubing on doors to 46’ wide and double 2" x 6" Class A500 on larger doors.
Door frame
14-gauge, welded, Class A513 square steel tubing: 1-1/2" x 1-1/2" on doors up to 46’ wide: 2" x 2" on doors over 46’ wide. Door frame unitized on doors to 46’ x 18’. Doors over 18’ high and over 46’ wide built in right and left halves. Doors over 18’ high may have the top and bottom horizontally divided to facilitate freight.
Door trusses
Heavy-gauge, steel tubing with angel iron webbing: 1 to 3 horizontal trusses, 6 1/2" to 12" deep, depending on door width, height and load requirements.
Door finish
All doors primed with black water base oxide and painted with black ester enamel epoxy.
Hinges
Strong factory welded leaf type hinges are installed on the horizontal centerline and top of the door. Top hinge can be ordered with 9-1/4" wide leaf up for wood buildings or 3" wide leaf up for steel buildings. Five top hinges on doors to 34’ wide, seven hinges on doors over 34’ and nine hinges on doors over 56’ wide and 16’ tall.
Auxiliary arms
Patented, high-clearance door support arms made of heavy-gauge square-steel tubing with self-concealing chain followers.
Wheels
roller wheels on door bottom and Auxiliary Arms are solid steel with sealed roller bearings inserts.
Drive unit
1 h.p. to 2 h.p. motor with 45 to 1 speed reducer. Electric brake installed on all doors. Jack shaft with dual chain drives supplied on all doors. Motor mounted to side on doors over 34’ wide.
Electrical wiring
Furnished and completely factory installed. 1 h.p. motors standard 110 volt with circuit breaker: 1.5 hp. and 2 h.p. wired 220 with up electrical safety disconnect. Conduit required to be supplied by others. Electrical components placed on door in a location to meet the requirements of N.E.C. section 513.
Operating control
NEMA type 1 "Up-Down-Stop" three push button control wired 24 volts standard.
Up/Down limits
Easy, positive micro-switch adjustment for top and bottom automatic shut-off contained in relay box with chain drive coupling with drive shaft.
Open/Close time
- Approximately one to two minutes, varies with door size.
Operating cables
7/32" aircraft cables in quantity to provide a 5 to 1 safety factor.
Cable lift drums
Four 2" diameter lift drums with cable guide and cable guard installed on full width drive shaft. Doors over 46’ wide use 3" diameter drums. Doors smaller than 36’ supplied with three lift drums. Doors larger than 56’ wide and 16’ tall supplied with six 3" diameter drums.
Drive shaft
Full width drive shaft constructed of 2" diameter steel torque tube. Load bearings supporting the drive shaft are installed on each side of lift drum and are bronze with grease fitting.
Single location lock
Self adjusting latches secure door to jambs with the turn of a crank. Eliminates walking to each side of door to lock/unlock. Micro switch safety disconnect supplied to interrupt power if Single Location Latch is not unlocked.
Bottom follower system
Hold bottom of door against building with door closed. Rubber bottom seal - 3" space between door frame and finished floor sealed with standard 12" wide bottom seal.
Floor cane-bolt
Factory installed at center of door over 40’ wide. Cane-bolt slides thru sleeve on door into a hole drilled in the floor.


Optional Features:

 

  • Extra-heavy duty trussing - Standard wind load can be increased or special demands provided.
  • Rubber top seal - Standard 9" wide rubber roofing membrane with ultraviolet inhibitor to weather proof top of door.
  • Weather-strip package - Supplied in bulk on a per foot basis for sealing between door frame and building jamb on vertical and horizontal surfaces and at center hinge area.
  • Jamb reinforcement rail - 10 gauge galvanized steel 5" wide, suitable for doors to 46’ wide, 3/16" oxide primed plate 5-1/2" wide available for doors wider than 46’. Wood or concrete jamb buildings require a reinforcing plate for operation.
  • Automatic "knee action" jamb latch - Patented drive shaft driven latch reaches out and pulls door securely closed before motor shuts off. Automatic cane bolt supplied on doors over 40’ wide. Single location latches deleted. Safety edge recommended.
  • Safety edge - Full width sensing switch to automatically stop and reverse a closing door if obstacle is encountered. Attaches to bottom of door prior to bottom seal.
  • Dead-man operating control - NEMA type 1 three button control wired so as to require constant pressure for door to raise or lower.
  • Up electrical safety disconnect - Completely removes power if limit control fails, standard on 1.5 h.p. and 2 h.p. doors. 1 h.p. doors supplied with circuit overload protection.
  • Commercial radio control - 3 button control allows door to be opened, stopped and closed or any combination from remote location. Requires Automatic Jamb Latch.
  • Remote antenna for radio control receiver - Increase range of radio control transmitter. Can be installed outside building.
  • Automatic cane-bolt - Increases wind-load strength of door frame. Standard on doors over 40’ wide.
  • Standard bi-fold doors - Available for use where Hi-Fold Door high-clearance advantages are not needed.
  • Walk doors - Standard aluminum frame insulated or heavy-duty steel frame insulated doors with residential grade keyed locksets.
  • Windows - Standard single glazed sliders or insulated commercial grade slider windows. Fixed sash windows available.
  • Framed openings - Prepared openings for walk doors and windows. Includes step guard for walk door.
  • Free standing door frames - Jambs and header supplied when adequate building structure is not available.
     

Stewart Overhead Door Co.
 
Bi Folding Bi Folding Bi Folding

Bi-Folding Doors(Resources)